Support, Dowloads, and Updates

Pro-Series CAN Firmware Updates:

The new Pro-Series CAN OBDII reader is now updateable. Periodic updates will become available as needed. Requires a computer COM (RS232) Port or USB port with USB to COM adapter. Also requires a good 9V battery to power the scan tool during the software load.

Main Update Software

Firmware Version 3.1 (9/01/2007)

This firmware is default firmware supplied with the Main Update Software, Metric Units Default

Firmware Version 4.0 (4/22/2008)

Firmware Version 4.5 (4/22/2008)

Firmware Version 4.6 (6/12/2008)

Pro-Series Firmware Updates:

The new Pro-Series OBDII reader is now updateable. Periodic updates will become available as needed. Requires a computer COM (RS232) Port or USB port with USB to COM adapter. Also requires a good 9V battery to power the scan tool during the software load.

Main Update Software

Firmware Version 3.1 (10/12/2007)

This firmware is default firmware supplied with the Main Update Software, Metric Units Default

Firmware Version 4.0 (10/12/2007)

This version of the firmware sets English Units as the default units of measure

Firmware Version 4.5M (4/22/2008)

This version of the firmware sets Metric Units as the default units of measure

Firmware Version 4.5E (4/22/2008)

This version of the firmware sets English Units as the default units of measure

VAG CAN Handheld Firmware Updates:

The new VAG CAN Handheld OBDII reader is now updateable. Periodic updates will become available as needed. Requires a computer COM (RS232) Port or USB port with USB to COM adapter. Also requires a good 9V battery to power the scan tool during the software load.

Main Update Software

This is the same main update software supplied for both of the above scanners

Firmware Version 1.1 (4/22/2008)

Firmware Version 0526 (6/12/2008)

Firmware Version 1.4 (7/30/2008)